怎么清洗灌膠機？
，假如您灌的產品一直是同一種膠水，中間不會換膠水，中間因為產品沒有供應上，里邊的膠水還沒有用完，需要放置幾天，等產品到位后再灌，這些環境下，清洗很是的簡單，假如有主動清洗功用，將清洗閥門打開，在操作系統中按一下主動清洗，機械會主動完結清洗工作;假如沒有主動清洗功用，你只需要把雙液主動灌膠機上面的動態攙雜管拆下來，放到酒精，或許清洗劑中清洗一下即可。有些客戶會問，那其它場所不清洗會不會堵呢?這個是不會的，因為雙液主動灌膠機，A膠，B膠是分隔的，AB膠只有觸摸后才會固化，雙液主動灌膠機，膠水從A料筒，B料筒出來后，其觸摸的部位是在攙雜管處，然后經由進程電機高速扭轉帶動攙雜管中的葉輪對AB膠進行切開與攙雜，所以觸摸的部位也就只在攙雜管處，其它場所沒有觸摸，一切膠水不會固化堵住管道的，并且雙液主動灌膠秘密封性很是的好，具有必定的保壓功用，所以就是你中間不灌膠，機械放置在那兒那里，也是不會與空氣觸摸的，不會發作化學反映，放幾天再用，一般環境下也是沒有問題的。
First of all, if the product you pour is always the same kind of glue, the glue will not be replaced in the middle, because the product is not supplied, the glue inside is not used up, it needs to be placed for several days, and then poured after the product is in place. Under these circumstances, cleaning is very simple. If there is an active cleaning function, open the cleaning valve, press the active cleaning in the operating system, the machine will master. If there is no active cleaning function, you only need to remove the dynamic mixing pipe on the double liquid active glue filling machine and put it into alcohol, or clean it in the detergent. Some customers will ask if the other places will be blocked by unclean washing. This is not true, because the two-liquid active glue filling machine, A glue and B glue are separated. AB glue solidifies only after touching. The two-liquid active glue filling machine, when glue comes out from A barrel and B barrel, touches the part of the mixing pipe, and then drives the impeller in the mixing pipe by high-speed twisting of the process motor to inject AB glue into the mixing pipe. The line cuts and adulterates, so the touching part is only in the mixing pipe, other places do not touch, all glue will not solidify and block the pipe, and the double liquid active glue filling secret sealing is very good, with a certain pressure-keeping function, so that you do not glue in the middle, machinery placed there, will not touch with the air, will not have a chemical reaction, put a few. It's no problem to reuse it in the ordinary environment.
主動灌膠機
Active glue filling machine
其次，假如你要換膠水，或許機械里邊膠水沒有用完，下一批產品要等上半個月以上時間才用，那就要全部清洗了，因為不合的膠水攙雜在一起會發作一系列問題，如膠水中毒等。假如帶有一鍵清先功用，那操作就斗勁簡單，按一下清洗鍵，機械主動完結。假如雙液主動灌膠機沒有一鍵清洗功用，則清洗的時分，先將沒用完的膠水排完，然后將有機溶劑，如天那水、工業酒精，放到機械里邊;然后將這些有機溶劑和膠水一起壓出來，再用氣槍吹開即可。用此類型的機械，清洗是十分的，否則的話，長期不必，膠水固化在膠閥中，或許是料桶中就很麻煩，或許有些配件就要改換了。所以每次用完后，必定要記得清洗。
Secondly, if you want to change the glue, maybe the glue inside the machine is not used up, and the next batch of products need to wait more than half a month to use, then all of them should be cleaned, because incompatible glue mixed together will cause a series of problems, such as glue poisoning. If there is a key clearing function, then the operation is simple, press the cleaning key, and the machine will finish on its own initiative. If the two-liquid active glue filling machine has no one-button cleaning function, the cleaning time is to drain the unused glue, then put organic solvents, such as Tiannashui and industrial alcohol, into the machine; then press these organic solvents and glue together, and then blow them off with an air gun. With this type of machinery, cleaning is very, otherwise, long-term unnecessary, glue solidified in the rubber valve, perhaps in the barrel is very troublesome, perhaps some accessories will be changed. So every time you use it, you must remember to clean it.
灌膠機在清洗時常用的清洗劑有哪些：工業酒精，天那水，丙酮或二氯甲烷，一般環境下工業酒精斗勁廉價，對于有的膠水假如酒精不好清洗的話，可以用丙酮去清洗，丙酮的清洗了局很不錯，就是本錢稍微高一點。
What are the commonly used cleaning agents for glue pouring machine: industrial alcohol, Tiannashui, acetone or dichloromethane, industrial alcohol is cheap in general environment. For some glue, if alcohol is not easy to clean, acetone can be used to clean, acetone cleaning board is very good, that is, the cost is slightly higher.
在對主動灌膠機清洗時：因為上除清洗劑都是一些化學溶劑，對皮膚會有必定的刺激性，并且有必定的氣味，在清洗時帶上防海員套，并連結車間的通風!清洗劑易輝發，易燃易爆，在利用時千萬不要抽煙等!
When cleaning the active glue pouring machine: because the cleaning agent is some chemical solvent, it will have certain irritation to the skin, and has certain odor. When cleaning, take the seafarer jacket, and connect the ventilation of the workshop! The cleaning agent is easy to glow, flammable and explosive, and do not smoke when using it!
Above is the relevant knowledge of two-component glue punch. I hope it will be helpful to you. If you need any other questions, please consult us at http://m.vrqf.com.cn.
上一篇：自動打膠機不為人知的小功用！
下一篇：自動打膠機的調整與操作！
