打膠機的利用率提高更高水平的方式
很多時候打膠機賣給客戶后，其使用壽命往往得不到很好的保證。機器設備的運行會大大降低打膠機的壽命。后期打膠機的維修保養也很重要。今天給大家介紹一下如何將打膠機的利用率提高到一個更高的水平。
In many cases, the service life of the glue applicator cannot be well guaranteed after it is sold to customers. The operation of the machine and equipment will greatly reduce the service life of the glue applicator. It is also very important to maintain the glue applicator in the later stage. Today, I'd like to introduce how to improve the utilization rate of the glue applicator to a higher level.
雙組份打膠機的車間保持適當溫度，打膠機各個零部件的溫度都有各自的正常范圍。一般情況下設備在低溫下運行小鍋較好，所以我們的打膠機每天在規定溫度后再運行，就會減少溫度對設備的影響。在平時的工作中，要注意檢查打膠機設備系統的工作狀況，作業的時候保證散熱通暢。
The workshop of the two-component glue applicator shall maintain an appropriate temperature, and the temperature of each part of the glue applicator shall have its own normal range. Generally, it is better for the equipment to operate in a small pot at low temperature, so our glue applicator operates after the specified temperature every day, which will reduce the impact of temperature on the equipment. During normal work, pay attention to check the working condition of the glue applicator equipment system, and ensure smooth heat dissipation during operation.
減少膠水材料雜質的影響。打膠機在運行的時候要跟原材料和膠水相接觸，那就會產生一些膠水殘渣和磨損產物等。這些雜物黏糊在設備上，雖然不會造成很大的傷害，但是會使打膠機運行的時候出現阻滯，影響點膠效率。所以我們進行點膠也要經常做好擦拭工作，清掉膠水殘渣以及原材料殘余等。
Reduce the influence of glue material impurities. When the glue applicator is running, it should contact with raw materials and glue, which will produce some glue residues and wear products. These sundries stick to the equipment, which will not cause great damage, but will block the operation of the glue dispenser and affect the dispensing efficiency. Therefore, we should always do a good job in wiping when dispensing glue, and remove the glue residue and raw material residue.
每天的工作量不要太多。機器雖然是用電的，但是你知道電器類都有自己的工作載荷，如果連續超負荷工作，那機器的散熱等各方面性能可能就不會那么好了，那也就會出現耗損，就跟人的身體一樣，熬不住了就是虧空身體。所以我們不要長期讓打膠機超負荷工作，那樣你會發現故障發生率明顯增多，工作指標質量也會減少，還會讓打膠機“提前退休”。
Don't work too much every day. Although the machine uses electricity, you know that all electrical appliances have their own working loads. If the machine is continuously overloaded, its performance in terms of heat dissipation and other aspects may not be so good, which will lead to wear and tear. Just like the human body, if it cannot endure, it will be a loss of body. Therefore, we should not let the glue applicator work overload for a long time. In that case, you will find that the failure rate will increase significantly, the quality of work indicators will also decrease, and the glue applicator will "retire early".
機臺長時間停用時應當拔下電源，這樣不僅能使機器的壽命延長而且還會省下來不少的電費。隨著日新月異的工業發展的需要，液體控制技術和點膠設備也在不斷的發展到超高精密控制和多樣化及化。
Unplug the power supply when the machine is out of service for a long time, which can not only prolong the service life of the machine, but also save a lot of electricity. With the rapid development of industry, liquid control technology and dispensing equipment are constantly developing to ultra-high precision control, diversification and specialization.
更換膠種，需清洗管路。此時先關閉進料閥，打開排料閥，將膠桶剩余膠料排出后，關閉排料閥打開進料閥將清洗溶劑倒入儲膠桶內，機體，按平時操作方式將溶劑壓出沖洗。
To replace the rubber type, clean the pipeline. At this time, first close the feed valve, open the discharge valve, discharge the remaining rubber in the rubber barrel, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage barrel, activate the machine body, and press the solvent out for washing according to the normal operation mode.
濟南雙組份打膠機的機臺部分請定期擦拭干凈，以增加使用壽命。混合在一起的膠量越多，其反應就越快，固化速度也會越快，所以要根據實際生產情況進行合理配膠，否則造成膠水的浪費。排除意外，提高生產效率。如今液體控制技術和點膠設備廣泛地應用到現代工業中的各種生產領域。此外，打膠機在每次使用后都要做好清潔工作，用酒精擦洗可見部分，經常運動的部分需要上機油或者黃油潤滑。
Please wipe the machine part of Jinan two-component glue applicator regularly to increase its service life. The more glue is mixed together, the faster the reaction will be and the faster the curing speed will be. Therefore, the glue shall be mixed reasonably according to the actual production situation, otherwise the glue will be wasted. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry. In addition, the glue applicator shall be cleaned after each use. The visible parts shall be wiped with alcohol. The frequently moving parts shall be lubricated with engine oil or butter.
實際上日常工作做到位就可以讓打膠機用很久的時間，當然您有任何關于產品設備的問題都可以來我們網站
m.vrqf.com.cn進行咨詢！
In fact, the glue applicator can be used for a long time if the daily work is done properly. Of course, you can come to our website www.jntiannuo Com for consultation!
上一篇：雙組份打膠機的安裝
下一篇：打膠機點膠時的三個常見缺陷
