中空玻璃生產線該如何維護?
中空玻璃生產線主要有四段：入料段、清洗干燥段、檢查段和合片段。隨著工藝的不斷進步，中空玻璃的應用相信會越來越廣泛，那么，中空玻璃生產線因為自動化程度高和生產中空玻璃質量優異，就會越來越多的客戶選擇中空玻璃生產線。但是，中空玻璃生產線需要不斷的維護，很多用戶可能會對如何維護中空玻璃生產線煩惱。
The insulating glass production line mainly has four sections: feeding section, cleaning and drying section, inspection section and closing section. With the continuous progress of technology, it is believed that the application of insulating glass will be more and more widely. Then, due to the high degree of automation and excellent quality of insulating glass production line, more and more customers will choose insulating glass production line. However, the insulating glass production line needs continuous maintenance, and many users may worry about how to maintain the insulating glass production line.
1.中空玻璃生產線的后背板需要有一定的傾斜度，這樣才能保證傳輸玻璃時不會出現意外而碎片；
1. The back plate of the insulating glass production line needs to have a certain inclination, so as to ensure that there will be no accidental fragments during glass transmission;
2.中空玻璃生產線的車間要求清潔無灰塵，這樣對中空玻璃生產線的電子元器件也是一種保護，另外，生產的中空玻璃內層也是無灰塵污染；
2. The workshop of the insulating glass production line is required to be clean and free of dust, which is also a kind of protection for the electronic components of the insulating glass production line. In addition, the inner layer of the insulating glass produced is also free of dust pollution;
3.中空玻璃生產線的清洗段對玻璃清洗時，使用去離子水，清洗玻璃更干凈而且不留痕跡；
3. When cleaning the glass in the cleaning section of the insulating glass production line, deionized water is used to clean the glass and leave no trace;
4.中空玻璃生產線的鏈條和電機，需要增加潤滑油或潤滑脂的，需要定時檢查并更換，檢查接電線是否良好等；
4. If the chains and motors of the insulating glass production line need to add lubricating oil or grease, they need to be checked and replaced regularly, and check whether the connecting wires are in good condition;
5.中空玻璃生產線的合片段是生產線重要的一個機械部分，出現碎片，需要搞清楚是一塊玻璃就碎片，這樣是吸盤損壞，需要將合片段大張開打開，更換吸盤或真空發生器，倘若是二塊玻璃時碎片，調整中空玻璃的板壓用力.
5. The closing segment of the insulating glass production line is an important mechanical part of the production line. If there are fragments, it is necessary to find out that one piece of glass is broken. In this case, the suction cup is damaged. It is necessary to open the closing segment and replace the suction cup or vacuum generator. If there are two pieces of glass, adjust the plate pressing force of the insulating glass
上一篇：雙組份打膠機安裝的順序是怎樣的
下一篇：天諾告訴你點膠機使用時千萬要注意哪些？
