合適點膠機是如何選擇出來的?
合適點膠機是如何選擇出來的?接下來小編給大家進行簡單的介紹。
How to choose the right dispenser? Next, I will give you a brief introduction.
1.膠粘劑:用于普點膠機通膠粘劑的單組分分配器,用于AB膠粘劑的雙液分配器,用于PU膠粘劑的PU膠粘劑分配器以及用于UV膠粘劑的特殊注射器。
1. Adhesive: single component distributor for general dispenser, double liquid distributor for ab adhesive, PU adhesive distributor for PU adhesive and special syringe for UV adhesive.
2,點膠過程:正常點膠使用半自動點膠機(如腳踏控制),定位線,選擇桌面,3軸,畫圈,其他自動功能點膠機。分配器自動化功能實際上是附件功能,分配器具有更多功能來控制膠粘劑,但其他功能也可以通過自動化機器人來實現。
2. Dispensing process: the semi-automatic dispensing machine (such as foot pedal control) is used for normal dispensing, with positioning line, desktop, 3-axis, circle drawing and other automatic functions. The distributor automation function is actually the accessory function. The distributor has more functions to control the adhesive, but other functions can also be realized by the automation robot.
3,工作效率與環境:產品少,效率低,不追求使用手動膠槍;戶外工作時,使用膠槍。您需要管理比賽并使用機器。對于自動分配,請使用自動機器。
3. Working efficiency and environment: less products, low efficiency, do not pursue the use of manual glue gun; when working outdoors, use glue gun. You need to manage the game and use the machine. For automatic allocation, use an automatic machine.

4.成本:有多種點膠解決方案,但是并非所有的點膠都需要使用機器,并且并非所有的自動點膠都連接到點膠機上。從成本的角度來看,如果您需要使用粘合劑過多的機器,請考慮更換粘合劑。如果具有自動化功能的分配器過于昂貴,請考慮移動產品而不是分配頭。
4. Cost: there are a variety of dispensing solutions, but not all dispensing requires a machine, and not all automatic dispensing is connected to the dispensing machine. From a cost perspective, if you need a machine with too much adhesive, consider replacing the adhesive. If the allocator with automation is too expensive, consider moving the product instead of the allocation header.
以上內容由點膠機小編整理,本文觀點不代表本站觀點。
The above content is compiled by dispensing machine, this point of view does not represent the point of view of this site.
上一篇:中空玻璃打膠機細節決定成敗!
下一篇:自動打膠機打膠不飽滿的原因有哪些?