美女被免费网站视频九色-美女被啪到哭网站在线观看-美女被拍拍拍拍拍拍拍拍-美女被色-4438x亚洲最大-4444狠狠

　　In the management of automatic locking screw machine, we should pay attention to safety problems all the time, so what problems should we pay attention to in general?

　　1.用電

　　1. Safe use of electricity

　　自動鎖螺絲機用電必須在承載電壓范圍內，否則容易造成元器件的損壞等嚴重影響。

　　The power consumption of the automatic screw locking machine must be within the safe range of the bearing voltage, otherwise it is easy to cause the damage of components and other serious effects.

　　2.設備接地

　　2. Equipment safety grounding

　　自動鎖螺絲機必須保證接地良好，確保人員操作的靜電在電壓范圍內，操作人員在接觸自動鎖螺絲機時，為保證操作人員的操作，需要將自動鎖螺絲機接到工廠接地端。

　　The automatic locking screw machine must be well grounded to ensure that the safety static electricity of personnel operation is within the voltage range. When the operator contacts the automatic locking screw machine, in order to ensure the safety operation of the operator, it is necessary to connect the automatic locking screw machine to the factory grounding terminal.

　　3.設備使用環境

　　3. Equipment use environment

　　自動鎖螺絲機設備需要在相對濕度和溫度范圍內使用，切勿在潮濕或或高溫的環境中使用，并且注意清洗或維護時不能用水清洗等。

　　The automatic locking screw machine equipment needs to be used within the range of relative humidity and temperature. Do not use it in humid or high temperature environment, and pay attention not to use water for cleaning or maintenance.

　　4.操作

　　4. Safe operation

　　人員的操作，如人員放置產品是務必在區域內，且頭或手勿深入自動鎖螺絲機運動區域。

　　For the safety operation of personnel, if the product is placed by personnel, it must be in a safe area, and the head or hand shall not go deep into the moving area of the automatic locking screw machine.

　　故障等異常時立即按下急停鍵

　　Press the emergency stop key immediately in case of fault and other abnormalities

　　清理設備旁邊的無關器件和物品，保持平臺清潔，防止運動軸撞到導致嚴重故障。

　　Clean the irrelevant devices and articles beside the equipment, keep the platform clean, and prevent the moving shaft from colliding and causing serious fault.